What this article covers: The complete month-end close process for BrizoConsol groups with entities connected via Xero — from finalising books in Xero through to distributing consolidated reports.

This is the complete month-end workflow for accountants and bookkeepers who use Xero entities in a BrizoConsol group. Work through each step in order — skipping steps or changing the sequence can produce incorrect consolidated figures.

Part 1 — Finalise and Load Data

1 Complete month-end in Xero In Xero

Do all of this in Xero before touching BrizoConsol. BrizoConsol will pull whatever is in Xero at the time of the reload — incomplete books produce incorrect consolidated figures.

  • Post all month-end journals: depreciation, accruals, prepayments, expense provisions
  • Complete bank reconciliation for every bank account — all items matched
  • Reconcile accounts receivable: confirm the AR ageing in Xero matches your debtor records
  • Reconcile accounts payable: confirm the AP ageing matches your creditor records
  • Review any drafts or awaiting-approval invoices — approve or remove them before reloading
  • Run Accounting → Reports → Trial Balance in Xero for the period end date and save it — you will use this to verify BrizoConsol later
2 Lock the period in Xero In Xero

Lock the period in Xero immediately after finalising. This prevents backdated entries from changing the figures you are about to consolidate.

  • Go to Accounting → Financial Settings in Xero
  • Scroll to Lock dates (setting them needs the Adviser role)
  • Set the lock date to the last day of the month just completed — e.g. 31 March 2026. Xero locks transactions dated on and before it. Use the lock date that stops all users, advisers included, so the month can’t be changed by anyone
  • Save
ℹ️ Locking does not prevent new entries for future periods — it only blocks changes to prior periods. You can unlock temporarily if a legitimate correction is needed, then re-lock and re-reload in BrizoConsol.
3 Reload data in BrizoConsol In BrizoConsol

BrizoConsol re-reads the last 12 months of trial balances and the last 6 months of invoices and bills from Xero every night, and does not read Xero’s lock dates. Reload the month after locking it to capture any final adjustments now, and tick Transactions if additional access is switched on — Xero transactions are not part of the nightly refresh.

  • In BrizoConsol, go to Organisation Settings → Data Loading
  • Ensure you are viewing the correct entity (switch using the organisation selector if needed)
  • On the current period’s row, click Reload (or Load missing), tick GL, Invoices and Bills, and tick Transactions and P&L by Tracking Category if additional access is on, and click Start Load
  • Check that each data type shows Loaded with a time of a few seconds ago
  • If you have multiple Xero entities in the group, switch to each entity and repeat
💡 If a load fails, go to Global Settings → Group Structure → Organisation Hierarchy and select the entity. A Token expired badge means you need to click Reconnect Now before reloading.

Part 2 — Consolidate in BrizoConsol

4 Review each entity's trial balance Verify

Before running eliminations, confirm BrizoConsol has the correct figures for every entity.

  • Switch to each entity using the organisation selector (top-left dropdown)
  • Go to Reports → All Reports → Trial Balance
  • Compare the total debits and total credits to the Xero Trial Balance report for the same period
  • Check that total assets, total liabilities, net profit, and equity all match
  • If figures differ: go to Organisation Settings → Data Loading, click Reload for the affected period, and re-check

Switch back to the group level before continuing.

5 Review auto eliminations Eliminate

Auto Elimination rules are rebuilt automatically each time data is loaded. Clear anything they held back for this period.

  • Go to Intercompany → Elimination Review and select the Actual scenario and the period you are closing
  • Method 4 proposals — click Review and post, check the entry and click Approve & Post
  • Method 2 differences — check the Difference and the treatment applied (FX, Write off or Timing). To change it, click Change treatment, adjust and click Confirm & Replace. A Timing difference set to Review before posting is not posted until approved
  • Entries not posted — a Method 1 period outside tolerance, or a rule whose invoice or bill name criterion was not met (the reason is shown under the row). Correct the data or the rule in Intercompany → Elimination Rules, or reject the row
  • Move on when Waiting for approval and Check the difference treatment list no rows for the period
6 Post one-off elimination entries Eliminate

For intercompany transactions not covered by auto rules — such as non-recurring management fees, intercompany dividends, or balances where account structures differ between entities.

  • Go to Intercompany → Other Eliminations
  • Click + Add entry
  • Enter the Elimination ID, date and description
  • Add debit and credit lines — select the CCOA account and enter the amount for each line
  • If the debit and credit base totals differ, allocate the difference under Difference Treatments (FX, timing or write-off)
  • Click Confirm — the entry posts immediately
  • Check the Status of the new entry — it should show Balanced for same-currency entries
💡 To cover intercompany balances no rule handles yet, open Intercompany → Elimination Rules and click Suggest Rules: BrizoElim reviews your companies’ charts of accounts and suggests elimination rules for you to confirm.
7 Post journal adjustments Adjust

Use Journal Entries for accounting standard adjustments — fair-value entries, impairments, reclassifications. These are different from elimination entries: journal entries correct or supplement the consolidated P&L and Balance Sheet under a specific accounting standard.

  • Go to Adjustments → GAAP Journals
  • Click Add a new journal entry
  • Enter the Journal ID, Date, Journal Type and description (the scenario is the one selected on the page)
  • Add debit and credit lines with the relevant CCOA accounts and amounts
  • Set an exchange rate per line if the entry involves foreign currency
  • Click Confirm
  • Check the form shows Entry is balanced before you click Confirm

CTA and NCI: There is nothing to post. BrizoConsol posts the CTA and NCI automatically every time the group is recalculated — after each night’s load, a mapping change or an elimination rule. On Review → Month End Status, check that the CTA and NCI / JV cards show Posted before reviewing reports. They stay Pending if the group has no company in another currency or no partly owned subsidiary.

8 Review the consolidated reports Review

With data refreshed and all eliminations and adjustments posted, review the consolidated outputs at group level.

  • Switch to the group entity using the organisation selector (top-left dropdown)
  • Go to Reports → All Reports → Profit & Loss — check revenue, gross profit, operating profit, and net profit vs prior month and prior year. Investigate any movement larger than expected.
  • Go to Reports → All Reports → Balance Sheet — confirm the balance sheet foots: Total Assets must equal Total Liabilities + Equity. Any imbalance indicates a missing or incorrect elimination or journal entry.
  • Go to Reports → All Reports → Cashflow — review operating, investing, and financing cash flows
  • Use the period comparison selector to view Actual vs Last Year or Actual vs Budget — this makes variances immediately visible
  • Click into any line that looks unexpected — the drill-down shows which entities and accounts are driving the number
  • Go to Pulse → Key Metrics — check health scores. A significant movement in a score can indicate a data issue or a genuine business change worth noting
💡 If the Balance Sheet does not foot, the most common causes are: a missing elimination entry (intercompany loan or investment not eliminated), a journal entry with an unbalanced debit/credit, or a CTA that has not been posted. Check Intercompany → Elimination Review first.
9 Distribute reports to stakeholders Distribute

Once the consolidated figures are signed off, distribute to management, owners, or clients.

  • Go to Insight Packages — open the package for the period and use Export to PDF, or check its schedule will send it for the current period.
  • To share a specific report: go to Reports, open the report, and use the export button (top right) to download as PDF or Excel
  • To share a dashboard: use the scheduled dashboard delivery feature or send a direct link to recipients who have BrizoConsol access
  • For board or investor reporting: use the Comparing Periods view to present Actual vs Budget or Actual vs Last Year side by side